Demand More of Your Lateral Integrated Interbody™ System

The First No-Profile® MIS lateral Integrated Interbody system with compressive lag screw fixation.1*


* STALIF L™ is indicated for use with supplemental fixation.


DISCOVER STALIF L™:

Clinical Applications ↓
Compressive Fixation ↓
Anatomic Design ↓
Large Graft Area ↓
STALIF® Technology ↓
Top of the Page ↑
Clinical Applications
Addressing Crucial Clinical Needs


STALIF L™ continues the 25+ year STALIF® heritage of innovation. Developed with prominent spine surgeons to address an unmet need, STALIF L meets the demands and complexity of minimally invasive lumbar lateral interbody fusion procedures.
Below: Intraoperative images taken prior to the addition of supplemental fixation; STALIF L is indicated for use with supplemental fixation.

Surgical Ease

Integrated self-tapping, self-drilling screws simplify implant immobilization with optimized screw angulation to provide strength and stability without interfering with posterior hardware.

Before STALIF L & After STALIF L

Recreate Segmental Alignment and Stability

Combining integrated fixation with implant lengths ranging from 45mm to 55mm, STALIF L implants seat across the entire apophyseal ring to recreate segmental alignment and stability.

Before STALIF L & After STALIF L

Restore Sagittal Balance

With a variety of footprint and height options available in 0 and 12 degrees of lordosis, STALIF L provides many options to restore anatomical alignment.

Before STALIF L & After STALIF L

Provide Indirect Decompression

STALIF L's implant heights range from 8mm to 14mm, providing indirect decompression to restore natural disc height.
Top of the Page ↑
Integrated Compressive Lag Fixation
Providing Constant Compressive Forces Against the Implant


Compresses endplates to cage and graft providing optimized segmental loading to support bone development in accordance with Wolff’s Law.

  • Easily-placed integrated fixation enhances stability
  • Self-tapping, self-drilling, cancellous lag screws
  • Provides No-Profile motion segment immobilization
Top of the Page ↑
Anatomic Design
Engineered to Maximize Opportunities for Fusion


Multiple footprint and lordotic options match patient anatomy for optimal endplate contact to aid in sagittal balance restoration and provide indirect decompression

Multiple Footprints

Multiple footprints for optimal endplate contact.
  • Lengths of 45, 50 & 55mm
  • Heights of 8, 10, 12, & 14mm
  • Lordosis of 0° & 12°
  • Width of 20mm

Bullet Nose

Eases insertion, particularly when osteophytes are present.

Pyramidal Teeth

Pyramidal teeth provide additional stability and resist implant migration in any orientation.

Clear Visualization

5 tantalum X-Ray markers indicate position on AP and Lateral images.
Top of the Page ↑
Large Graft Area
Optimized, Open Graft Window to Promote Fusion Throughout


Increases opportunities for fusion through the implant.

  • Large central graft window
  • No center rail to obstruct fusion mass
Top of the Page ↑
STALIF® Technology
A Member of the Revolutionary STALIF® Family


As a STALIF® Family product, STALIF L™ represents the “Gold Standard” in No-Profile® Integrated Interbody™ Technology. Based on AO principles of fracture fixation, STALIF® promotes compressive lag fixation that ensures biomechanical stability and secure graft-endplate contact in line with Wolff’s Law of bone remodeling.

STALIF® No-Profile® Design

  • Eliminates profile of plate, allowing for optimal load transfer within the vertebral segment
  • Spares tissue with smaller surgical envelope to insert implant and integrated fixation
  • Simplifies surgical technique to implant device
Left: Intraoperative image taken prior to the addition of supplemental fixation; STALIF L is indicated for use with supplemental fixation.

Horizontal Inclination

STALIF L™ screws are angled and biomechanically designed to direct axial forces along the long axis of the screws—significantly reducing bending moments and preventing de-rotation of the screw and / or screw back- out.

Midline Convergence

Centinel’s converging screw design and angles are biomechanically more resistant to screw backout compared to parallel screws. Additionally, midline convergence angles are designed to provide a more secure interbody construct.

Anti Back-Out® Screws

Our cancellous lag screws are designed with an Anti Back-Out® (ABO®) retention feature—utilizing a titanium split-ring for an added layer of security.

The gold standard in minimally-invasive lateral fixation, STALIF L maximizes opportunities for fusion by providing No-Profile, intradiscal, integrated compressive lag fixation.


1 Data on file at Centinel Spine.

For ordering information, please contact us at (484) 887-8810 or info@centinelspine.com


Our Products:

prodisc C
prodisc C Vivo
prodisc C SK
prodisc C Nova
prodisc L

The Story of Centinel Spine

Watch this three minute primer on Centinel Spine and its unique and extraordinary place as a catalyst of change in the spine industry—with pioneering technologies and a clinical history that have led to successes ranging from PGA champions to a growing list of surgeon-patients.

SEE MORE VIDEOS
Contact Us:

Centinel Spine®

900 Airport Road, Suite 3B
West Chester, PA 19380

Tel: 484.887.8810
Fax: 800.493.0966

Email:  info@centinelspine.com

Map & Details...


Last Updated:   /
© Centinel Spine®, LLC
Quick Links:
Company History
Cervical Disc Replacement
Lumbar Disc Replacement

Reimbursement

Legal Items:
Privacy Policy
Terms & Conditions
Legal Notice
Corporate Compliance
Get the Apps:
Download on the App Store
Social: